PSF (price per square foot) tells you how much you pay for each square foot of space. Quantum is the total price on the contract. Use PSF to compare one property’s value against another’s, and use quantum to decide whether you can afford it. A unit with a lower PSF can still have the higher quantum, so the two numbers answer different questions and you need both.
This guide is for home buyers, investors, landlords and business owners who see both terms on listings, launch brochures and agent messages. It shows how each is calculated, where they mislead, and how to use them together.
TL;DR
- PSF = price ÷ floor area in square feet. It is a value yardstick for comparing similar properties.
- Quantum = the total price. It sets your loan size, your cash outlay and your monthly repayment.
- Banks assess quantum, not PSF. The MAS total debt servicing ratio caps loan repayments at 55% of your monthly income, whatever the PSF.
- Check the area behind the PSF. Since 1 June 2023, floor area definitions have been harmonised, so older and newer listings are not always measured the same way.
- Compare PSF within like-for-like groups, such as the same project, the same tenure or the same property type, then test affordability on quantum.
Table of Contents
- What PSF and quantum mean in a Singapore listing
- How to calculate PSF and quantum
- Why a lower PSF can still mean a higher quantum
- Why banks care about quantum, not PSF
- When the area behind the PSF changes
- Asking PSF vs transacted PSF
- Using PSF and quantum across property types
- A short checklist before you decide
- Our view on PSF and quantum
- Where we can help
- FAQ
- Sources
What PSF and quantum mean in a Singapore listing
A listing might read “S$1,900 psf, 700 sq ft, S$1.33 million”. Those are three numbers describing one price.
PSF is the price divided by the floor area in square feet. A unit sold for S$1,380,000 with 900 sq ft of area works out to S$1,533.33 per square foot, which developers and agents usually round to S$1,533.
Quantum is the full price, the number you would write on the option to purchase. Rearranged, it is simply area × PSF. A 700 sq ft unit at S$1,900 PSF has a quantum of S$1,330,000.
Two more terms appear next to these:
- PSM is price per square metre. Official data often uses it. One square metre is about 10.764 square feet, so multiply a PSM figure by roughly 0.093 to get PSF.
- PSF PPR is a land price measure used for development sites: land price divided by the floor area the site can legally support. You will see it in news about government land sales. It is not the price per square foot of a finished unit.
Which price counts
URA’s REALIS data dictionary defines property price as the amount agreed between buyer and seller for the property and land. It excludes stamp duties, agency fees, legal fees and other professional fees. So a quoted PSF is a pre-cost figure. Your real cash outlay will be higher once duties and fees are added.
How to calculate PSF and quantum
The arithmetic is simple. The discipline is in using the right inputs.
- Take the price. Use the asking price when you are shortlisting and the transacted price when you are judging value. These are different data points, and the gap between them is often where negotiation happens.
- Take the area in square feet. If a listing gives square metres, multiply by 10.764.
- Divide. Price ÷ area = PSF.
- To go backwards, multiply PSF by area to get quantum.
Worked example
You are choosing between two condo units in the same district.
| Unit A | Unit B | |
|---|---|---|
| Area | 1,600 sq ft | 900 sq ft |
| PSF | S$1,400 | S$1,700 |
| Quantum | S$2,240,000 | S$1,530,000 |
Unit A looks cheaper on PSF, by S$300 per square foot. But it costs S$710,000 more in total. If your budget ceiling is S$1.6 million, Unit A is out of reach no matter how attractive its PSF is. If you need three bedrooms and a helper’s room, Unit B may be too small however affordable its quantum is. The right unit depends on which of the two numbers is your binding constraint.
Which area is in the calculation
URA’s data dictionary states that for apartments, condominiums, cluster housing and townhouses, its median price per square metre is computed on strata floor area. For detached, semi-detached and terrace houses it uses land area. This matters when you compare a condo with a landed home: their PSF figures rest on different bases and should not be put side by side as if they were the same thing.
Why a lower PSF can still mean a higher quantum
PSF ignores size. Quantum ignores value for space. Each one hides what the other shows.
- Large units usually carry a lower PSF. Bigger units often price lower per square foot than small ones in the same project, yet cost more in total.
- Small units concentrate the premium. Compact units can show a high PSF while keeping quantum within reach of more buyers.
- Location and age move PSF. A newer project near an MRT station typically commands a higher PSF than an older project farther away. That is the market pricing in location, tenure and condition.
The practical lesson: do not read a low PSF as a bargain or a high PSF as an overpayment until you know the size and the quantum. A high-PSF small unit can be the more serviceable loan.
Why banks care about quantum, not PSF
When you apply for a property loan, the lender looks at how much you borrow and whether your income supports the repayments. The MAS total debt servicing ratio, or TDSR, sets the maximum at 55% of your gross monthly income for property loans where the option to purchase was granted on or after 16 December 2021. Your other monthly debts count towards that limit. MAS gives the example of a borrower whose existing debts take 10% of income: the property loan can then use only the remaining 45%.
Nothing in that framework mentions PSF. The loan you need follows from the quantum, less your down payment. For HDB flats and executive condominiums there is an additional ceiling, the mortgage servicing ratio, but it too looks at repayments, not PSF.
So the order of operations for an affordability check is:
- Work out your income, existing debts and cash and CPF available.
- Work out the maximum quantum you can service.
- Within that quantum, use PSF to compare the options.
Our property affordability check guide walks through this sequence, and our guide to Singapore mortgages and affordability covers the loan side in more depth.
When the area behind the PSF changes
A PSF figure is only as comparable as the area it is built on. Two things trip up buyers.
Strata area includes more than you walk on
Singapore listings generally quote strata area, the area on the title. Under URA’s circular on harmonised floor area definitions, strata area is measured to the middle of the wall and can include voids under the earlier rules. If a listing omits the area, the title records are the place to confirm it, rather than working back from a price and PSF you were told.
Floor area definitions changed on 1 June 2023
The same URA circular took effect on 1 June 2023. It aligned how URA, SLA, BCA and SCDF measure floor area. All strata areas now count as gross floor area, and all voids are excluded from strata area.
The effect for buyers is that some newer launches quote a slightly smaller area than comparable older projects would have, which lifts the headline PSF even when the total price is similar. That is a change in measuring, not a signal that the unit is better or worse value. When you compare a new launch to a resale unit, put the quantum, the usable layout and the measurement basis next to the PSF instead of reading PSF on its own.
A practical way to handle it:
- Note the headline PSF and the quantum.
- Check what area the PSF uses and whether it includes items like air-con ledges or other private space.
- Compare how usable the layout is: room sizes, storage, and how the living space flows.
- Divide the quantum by the area you can actually use to get an effective PSF.
- Run the affordability test on the quantum.
Our new launch vs resale guide applies this to the choice between the two.
Asking PSF vs transacted PSF
An asking PSF is what a seller wants. A transacted PSF is what a buyer and seller agreed. In a hot market the two can be close. In a slower market the gap can widen, and it differs project by project.
When you shortlist, use asking PSF as a screen. When you decide what to offer, use recent transacted PSFs in the same project or in comparable nearby projects. Keep them in separate columns in your notes. Mixing them produces false bargains and false overpayments.
Using PSF and quantum across property types
Residential
Residential sales are commonly compared on PSF within a project, and on quantum across your budget shortlist. Altus Group’s price per square foot valuation guide notes that residential property is often compared on a per-unit basis, which is why quantum matters so much for home buyers.
Commercial and industrial
For offices, shops and industrial space, PSF is the everyday yardstick. The same guide describes price PSF as property value divided by size in square feet, common for office, retail and industrial properties, and valid only as a like-for-like comparison. A shophouse unit and a business-park office are not comparable on PSF alone, because tenure, location, lease profile and permitted use differ.
The same guide also notes that PSF means different things depending on the valuation approach. In a cost approach it reflects the cost of building, while in a sales comparison approach it is the sale price divided by area. If you are an owner-occupier business or an investor, ask which one a PSF figure represents before you rely on it. Our commercial property value guide explains what drives that value.
Landlords and tenants
Rental markets use a similar idea: rent per square foot per month. The same logic applies. A lower rental PSF on a larger unit can still be a higher total rent than your budget allows, so compare monthly rent (the rental quantum) against what you can afford and PSF to judge value.
A short checklist before you decide
- Write down the quantum you can service under TDSR before you view any unit.
- For each unit, record asking price, area, PSF and the area basis.
- Compare PSF only within the same project, tenure and property type.
- Pull recent transacted prices for the same project, separately from asking prices.
- Add duties and fees on top of the quantum to get your real cash needed.
- For launches, compare against resale on effective PSF and layout, not the headline.
Our view on PSF and quantum
We often see buyers fall in love with a PSF number. It feels like a score, and a lower score feels like a win. It is not a score. It is a ratio, and a ratio tells you nothing about whether the total fits your life.
Our approach starts from your objective: a home to live in, an investment to hold, a rental to manage or a premises for your business. Then we work out the exit as well as the entry. A unit that suits your budget today but is hard to resell or lease later has not served you, whatever its PSF.
With a background in both engineering and real estate, we look at what the floor area really delivers: how the space is laid out, what the measured area includes and what the quantum means for your loan. After the purchase, we support you on renovation and regulatory matters too, because the cost of the unit is only part of the cost of owning it.
Use PSF to compare. Use quantum to decide. Use both to build a portfolio that makes sense over years, not just at the point of sale.
Aman
Where we can help
If you are comparing launches or resale units and want PSF, quantum and affordability set out against your own goals, our real estate consultancy and sales and leasing services cover residential, commercial, industrial and international properties. You can start with the SG new launches we cover or speak to us through our consultancy page.
For a deeper look at launches, our Singapore new launches buying guide sets out what to weigh before you commit.
FAQ
Is a lower PSF always better?
No. A lower PSF means you pay less per square foot, but it says nothing about total cost, location, tenure, layout or condition. Compare PSF between similar properties, then check that the quantum fits your budget and loan limit.
Is quantum the same as the price I pay?
Quantum is the purchase price of the property. It excludes stamp duties, agency fees, legal fees and other professional fees, which URA’s data dictionary also leaves out of its definition of property price. Add those to find your total cash needs.
Do banks look at PSF when I apply for a loan?
The lending framework looks at your income, your debts and the loan amount. MAS sets the TDSR threshold at 55% of monthly income for property loans, and it works from repayments on the total loan, which follows from the quantum rather than the PSF.
Why do new launches show a higher PSF than before for similar prices?
Part of it can be the change in floor area definitions that took effect on 1 June 2023. When the quoted area shrinks while the total price stays similar, PSF rises. Compare quantum, layout and usable space alongside the headline PSF.
Can I use PSF to compare a condo with a landed house?
Not directly. URA’s data uses strata floor area for condominiums and apartments but land area for landed houses, so the two figures measure different things. Compare landed homes with other landed homes, and condos with condos.
Sources
- MAS: Total Debt Servicing Ratio for Property Loans
- URA: Harmonisation of Floor Area Definitions
- URA: REALIS Data Dictionary
- Altus Group: Price Per Square Foot Valuation Method


