Skip to main content

Choose your stack before you choose your floor. A stack is the vertical column of units that share the same last digits in their unit number, and it fixes what you cannot change later: which way you face, what you look at, how far you walk to the lift and what could be built in front of you. Read the stack on the site plan, match it to the floor plan, then compare it against your own priorities and against recent sales in the same project. This guide shows you how, step by step, for a home or an investment unit.

Com
Choose a Condo Stack With Clarity
Explore property guidance and listings from Aesthetic Havens as you compare condo stacks, project details, and your priorities.

TL;DR

  • A stack is the column of units with the same unit-position number, for example every unit ending in 05. Check block and floor-plan exceptions.
  • Start with the north arrow on the site plan, trace the stack’s outer wall to find its facing, then check what surrounds it.
  • Lift access, shared facilities and floor level decide daily comfort, and they matter differently for families, elderly members and tenants.
  • Price a stack against actual transactions in the same project, not a rule of thumb for floors or views.
  • Before you commit, check the zoning of the land around the project and the approved plans, then see the unit in person.

Table of Contents

What a stack is and how to read the number

In Singapore, a unit number such as #12-05 has two parts: the floor (12) and the stack (05). Every unit ending in 05 generally sits directly above and below the others, which is why a stack is described as a vertical column of units sharing the same position number. Because the units are stacked, they share the same orientation and, usually, the same layout. That is why agents and buyers talk about “good stacks” and “bad stacks” within one project.

The numbering is not always as simple as it looks. Two examples from developer site plans show the range:

The lesson is that you cannot assume a stack number means the same thing in every project. In a multi-block development, the block number and the stack number together identify the unit. In a single tower, stack heights and special features can differ from stack to stack. Always confirm exceptions such as corner units, ground-floor patios, roof terraces, penthouses and skipped numbers against the project’s schematic.

Step 1: Read the site plan

The site plan is the bird’s-eye drawing of the whole development. The schematic diagram or elevation chart that comes with it shows which stacks exist on which floors. Use them in this order.

  1. Find the north arrow and the legend. Without them you cannot tell direction. The north arrow, block outlines and stack numbers are the key references, and tracing a stack’s outer wall against the north arrow tells you which way it faces.
  2. Locate your block and your stack. Mark the stack on the plan, then note its neighbours: other blocks, the clubhouse, the pool, entrances, driveways, bin centres and service areas.
  3. Trace outward. Follow the stack’s relationship to roads, neighbouring blocks, facilities, entrances, service areas and the surrounding land. A stack that looks quiet inside the project can face a busy road or a service road just beyond the boundary.
  4. Match the stack to the floor plan. The stack tells you the shape and size of the unit. Check the unit type, the position of the balcony, the bedroom windows and the kitchen.

If you do this for three or four candidate stacks, you will usually eliminate half of them before you ever visit the showflat.

Step 2: Compare facing, sun and wind

Facing decides how much sun the unit takes and when. Many buyers avoid stacks whose main windows face the afternoon sun, while others like bright west-facing living rooms and accept the heat in exchange for a better view or a lower price. Neither choice is wrong, but it should be a choice made with the north arrow in front of you, not a guess made at an evening viewing.

Two practical points help:

  • Check the direction of the main living area and the bedrooms separately. A stack can have a cool living room and a hot master bedroom.
  • View a short-listed unit at the time of day you would actually be at home. A weekday evening viewing for a working household tells you more than a weekend noon viewing.

For a deeper look at how direction affects daily living, see our guide to north-south facing homes in Singapore.

Step 3: Check views and what could block them

A view that exists on the day you buy is not the same as a view you will keep. Look at what sits in front of the stack and ask who owns it and what it is zoned for.

Singapore condo view across a vacant parcel

The URA Master Plan shows the zoning and permitted use of land parcels across Singapore. A vacant plot, a reserve site or a low-rise parcel next to a high-rise zone can all change within the years you hold the unit. Search the plot opposite your stack on the Master Plan before you decide, and read our summary of the URA Master Plan and what it signals for property value.

A good habit: write down the three things you can see from the unit today, then write down what could replace each of them. If the answer for the main view is “a block of similar height 40 metres away”, you are paying for a view that may not last.

Step 4: Weigh noise, privacy and lift access

The stack next to the lift core is the convenient one. It is also the one where you hear the lift doors and neighbours walking past your door. A stack close to the lift core offers a shorter walk but may have lift-lobby noise and neighbours passing the door. A stack at the far end of a corridor is quieter, but it adds a longer walk with groceries, a pram or a suitcase.

On the site plan, also look for:

  • Stacks that face the driveway, the drop-off point or the bin centre.
  • Stacks that look directly into another block’s windows. Distance between blocks matters more than the floor number.
  • Stacks that sit above or next to the pool deck, barbecue pits or function rooms, which can mean evening noise.
  • Special lift arrangements. In some towers one stack has a private lift, as at Union Square Residences, so the stack number changes how you move through the building.

Then go in person. Stand in the unit, close the windows, and listen. Do the same with the windows open.

Step 5: Match floor level and layout to your household

The floor and the stack work together. A lower floor facing a landscaped garden or pool deck gives quick access, which is useful for households with young children or elderly members. If you are planning for stairs, ramps or the need to move around the home as family needs change, our partner reading on an inclusive home upgrades list goes room by room through the adjustments worth thinking about.

A higher floor generally means more light, less street noise and better views, but a longer lift ride and a greater dependence on the lift. We compare the trade-offs in high floor vs low floor.

Layout is where stacks narrow down quickly. Within one project, different stacks often carry different unit types. One stack may hold only one-bedders, another two-bedroom units with a study, another the larger family layouts. Use these questions to shortlist:

Your situation What to look for in the stack
Couple or small family, staying long term A layout whose bedrooms sit away from the lift and the driveway, and a facing you are comfortable with in the evening
Family with young children or elderly members A lower or mid floor, close to the lift and facilities, but not directly above the pool deck
Investor renting to tenants A practical, efficient layout and a stack that is easy to describe and photograph; a convenient walk to the lift
Buyer looking at a penthouse or special unit Confirm the stack’s exceptions, such as terraces, private lifts and different heights; see our penthouse buyer checklist

Also compare the unit size and the share value, since they affect your maintenance contributions. Our note on share value in a Singapore condo explains what the figure means for you.

Step 6: Price the stack against real transactions

A good stack often costs more, but there is no fixed percentage for a floor, a facing or a view. The sound way to price a stack is to compare recent transactions from the same project, matched by stack, size, floor level, layout and timing, and then adjust for the real differences between those units and yours.

In practice:

  1. List the recent sales in the project for the same unit type.
  2. Group them by stack and floor band.
  3. Note the dates, because a sale from a year ago in a different market is a weak comparison.
  4. Ask what the stack you are considering has that the comparable does not, and what it lacks.

For new launches, the same logic applies to the price list: compare the available units by stack and floor, not just the headline price per square foot. Our guide to ways to value real estate assets in Singapore sets out the methods in more detail.

For rental appeal, think like the tenant. A tenant looks at the walk from the MRT, the walk from the lift, the light and the noise. A stack that performs well on those points tends to be easier to let, and an easier let protects your yield.

Step 7: Check the paperwork and the unit in person

Before you commit to a resale unit, do two kinds of checking.

Official checks. URA’s buying guidance, last updated 6 November 2026, says that private-property buyers should check for unauthorised works. You can ask the seller for the approved plans or obtain planning records through DC15, and buyers can otherwise become liable after taking over. Stack features such as enclosed balconies, altered kitchens and added structures are exactly where unauthorised works turn up.

Physical checks. Visit at different times. Open every window and door, check water pressure and the view, and walk the route from the lift to the unit. Our condo defects checklist goes room by room, and the real estate due diligence checklist covers the paperwork side.

Perspective

Most buyers we meet choose a project first and a stack almost by accident, at the end of a long showflat visit. We think that order should be reversed in part: once you have the project, the stack is the decision with the longest consequences.

Aman’s background combines engineering and real estate, so we read a site plan the way an engineer reads a drawing: north arrow first, then the surroundings, then the unit. We then ask what you want from the property, whether that is a home to stay in, an investment to rent out or a step in building your portfolio, and what your exit looks like. A stack that suits a family home for fifteen years is not necessarily the one that suits a five-year investment.

That is why our guidance starts with your objectives and exit strategy, and why we stay with clients after the purchase, with renovation and regulatory advice. The stack you pick shapes both.

Aman

How we can help you choose

If you are looking at a launch, we cover SG new launches and can help you go through the unit mix, the stacks and the floors against your objectives. For resale and other property types, see our residential, commercial and industrial listings, or start with our real estate consultancy if you want guidance on valuation, buying or portfolio planning.

Com

Bring the project name and two or three stacks you are considering. We will help you compare them against your plans for the property.

FAQ

Is a higher stack number better?

No. The number only labels the position within the block or tower, and its meaning depends on the project. Stack 01 in one development can be a corner unit with a great view, while in another it sits beside the lift. Judge each stack by its facing, surroundings and layout.

Does a stack with a better view cost more?

Often, but there is no standard premium. Compare recent transactions in the same project, matched by stack, size, floor and timing, and adjust for the actual differences. Also check what could be built in front of the view, since a future building can change what you are paying for.

Should I avoid the stack next to the lift?

Not necessarily. It gives a shorter walk, which suits households with children, elderly members or heavy shopping, but it can bring lift-lobby noise and passing neighbours. Stand in the unit and listen, and decide based on how much the walk matters to you.

Can I choose my stack when buying a new launch?

Yes, in most launches you pick from the units still available, and the available stacks narrow as sales progress. Decide your priorities on facing, floor and layout before the launch, so you can choose quickly when your preferred units come up.

Sources

Get In Touch

Contact Us

Aesthetic Havens Singapore

Aman Aboobucker

CEA License No: R068642A

ERA Realty Network Pte Ltd
450 Lor 6 Toa Payoh,
ERA APAC Centre